How to install the transformer inductor core correctly?

The inductor core of a transformer is one of the most critical components of a transformer, and its proper installation is critical to the transformer's operating performance. The following section describes how to properly install the inductor core of the transformer.

1. Preparation

Before installing the inductor core, first of all, prepare the required tools and materials, such as: transformer inductor core, insulating pads, fixing bolts, wrenches, screwdrivers and so on. At the same time, make sure the working area is clean and tidy to avoid dust and debris from entering into the transformer.

2. Clean the core

Before installing the inductor core, make sure that the surface of the core is clean and tidy, without oil stains or other debris, so as not to affect its working effect. You can use cleaner or alcohol cotton ball to wipe the surface of the iron core, and then dry it with a clean cloth.

3. Installation of the iron core

Place the iron core in the core slot of the transformer and make sure that the iron core fits perfectly with the slot. In the installation process, pay attention to avoid the iron core collision or friction, so as not to cause damage. According to the design requirements of the transformer, the iron core can be installed sequentially in the corresponding order.

4. Positioning the core

After installing the iron core, use the fixing bolts to fix the iron core in the slot opening to ensure that the iron core will not move or shake. At the same time, pay attention to the tightening of the bolts, do not be too tight or too loose, so as not to affect the performance of the core.

5. Installation of insulating mat

An insulating pad needs to be installed between the core and the slot to prevent direct contact between the core and the slot, reducing the risk of damage and short circuit. The insulating mat should fit perfectly with the core and the slot to ensure the insulation effect.

6. Checking the connection

After installing the inductor core, conduct a thorough inspection to ensure that there is no gap or clearance between the core and the slot, make sure that the fixing bolts have been firmly tightened and that the insulating pads are not loose or misaligned.

Through the above steps, you can correctly install the inductor core of the transformer. During the installation process, pay attention to the details to ensure that each step is correct to ensure the normal operation and stable performance of the transformer. I hope the above will be helpful to you.